Lattice Mapping Report File for Design Module 'TinyFPGA_A2'



Design Information

Command line:   map -a MachXO2 -p LCMXO2-1200HC -t QFN32 -s 4 -oc Commercial
     template_a2_impl.ngd -o template_a2_impl_map.ncd -pr template_a2_impl.prf
     -mp template_a2_impl.mrp -lpf
     D:/FPGA/BlinkProject/impl/template_a2_impl.lpf -lpf
     D:/FPGA/BlinkProject/template_a2.lpf -c 0 -gui -msgset
     D:/FPGA/BlinkProject/promote.xml 
Target Vendor:  LATTICE
Target Device:  LCMXO2-1200HCQFN32
Target Performance:   4
Mapper:  xo2c00,  version:  Diamond (64-bit) 3.12.1.454
Mapped on:  11/04/21  10:49:04


Design Summary
   Number of registers:     24 out of  1346 (2%)
      PFU registers:           24 out of  1280 (2%)
      PIO registers:            0 out of    66 (0%)
   Number of SLICEs:        15 out of   640 (2%)
      SLICEs as Logic/ROM:     15 out of   640 (2%)
      SLICEs as RAM:            0 out of   480 (0%)
      SLICEs as Carry:         13 out of   640 (2%)
   Number of LUT4s:         30 out of  1280 (2%)
      Number used as logic LUTs:          4
      Number used as distributed RAM:     0
      Number used as ripple logic:       26
      Number used as shift registers:     0
   Number of PIO sites used: 18 + 4(JTAG) out of 22 (100%)
   Number of block RAMs:  0 out of 7 (0%)
   Number of GSRs:        0 out of 1 (0%)
   EFB used :        No
   JTAG used :       No
   Readback used :   No
   Oscillator used : Yes
   Startup used :    No
   POR :             On
   Bandgap :         On
   Number of Power Controller:  0 out of 1 (0%)
   Number of Dynamic Bank Controller (BCINRD):  0 out of 4 (0%)
   Number of Dynamic Bank Controller (BCLVDSO):  0 out of 1 (0%)
   Number of DCCA:  0 out of 8 (0%)
   Number of DCMA:  0 out of 2 (0%)
   Number of PLLs:  0 out of 1 (0%)
   Number of DQSDLLs:  0 out of 2 (0%)
   Number of CLKDIVC:  0 out of 4 (0%)
   Number of ECLKSYNCA:  0 out of 4 (0%)
   Number of ECLKBRIDGECS:  0 out of 2 (0%)
   Notes:-
      1. Total number of LUT4s = (Number of logic LUT4s) + 2*(Number of
     distributed RAMs) + 2*(Number of ripple logic)
      2. Number of logic LUT4s does not include count of distributed RAM and
     ripple logic.
   Number of clocks:  1
     Net clk: 13 loads, 13 rising, 0 falling (Driver: internal_oscillator_inst )
     

   Number of Clock Enables:  0
   Number of LSRs:  0
   Number of nets driven by tri-state buffers:  0
   Top 10 highest fanout non-clock nets:
     Net led_timer_21: 2 loads
     Net led_timer_22: 2 loads
     Net led_timer_23: 2 loads
     Net n102: 1 loads
     Net n104: 1 loads
     Net n208: 1 loads
     Net n209: 1 loads
     Net pin10_sda_c: 1 loads
     Net pin11_scl_c: 1 loads
     Net pin9_jtgnb_c: 1 loads




   Number of warnings:  0
   Number of errors:    0
     




Design Errors/Warnings

   No errors or warnings present.



IO (PIO) Attributes

+---------------------+-----------+-----------+------------+
| IO Name             | Direction | Levelmode | IO         |
|                     |           |  IO_TYPE  | Register   |
+---------------------+-----------+-----------+------------+
| pin1                | OUTPUT    | LVCMOS25  |            |
+---------------------+-----------+-----------+------------+
| pin2                | OUTPUT    | LVCMOS25  |            |
+---------------------+-----------+-----------+------------+
| pin3_sn             | OUTPUT    | LVCMOS25  |            |
+---------------------+-----------+-----------+------------+
| pin4_mosi           | OUTPUT    | LVCMOS25  |            |
+---------------------+-----------+-----------+------------+
| pin5                | OUTPUT    | LVCMOS25  |            |
+---------------------+-----------+-----------+------------+
| pin6                | OUTPUT    | LVCMOS25  |            |
+---------------------+-----------+-----------+------------+
| pin7_done           | OUTPUT    | LVCMOS25  |            |
+---------------------+-----------+-----------+------------+
| pin8_pgmn           | OUTPUT    | LVCMOS25  |            |
+---------------------+-----------+-----------+------------+
| pin9_jtgnb          | OUTPUT    | LVCMOS25  |            |
+---------------------+-----------+-----------+------------+
| pin10_sda           | OUTPUT    | LVCMOS25  |            |
+---------------------+-----------+-----------+------------+
| pin11_scl           | OUTPUT    | LVCMOS25  |            |
+---------------------+-----------+-----------+------------+

| pin16               | OUTPUT    | LVCMOS25  |            |
+---------------------+-----------+-----------+------------+
| pin17               | OUTPUT    | LVCMOS25  |            |
+---------------------+-----------+-----------+------------+
| pin18_cs            | OUTPUT    | LVCMOS25  |            |
+---------------------+-----------+-----------+------------+
| pin19_sclk          | OUTPUT    | LVCMOS25  |            |
+---------------------+-----------+-----------+------------+
| pin20_miso          | OUTPUT    | LVCMOS25  |            |
+---------------------+-----------+-----------+------------+
| pin21               | OUTPUT    | LVCMOS25  |            |
+---------------------+-----------+-----------+------------+
| pin22               | OUTPUT    | LVCMOS25  |            |
+---------------------+-----------+-----------+------------+



Removed logic

Block GSR_INST undriven or does not drive anything - clipped.
Signal VCC_net undriven or does not drive anything - clipped.
Signal led_timer_58_add_4_1/S0 undriven or does not drive anything - clipped.
Signal led_timer_58_add_4_1/CI undriven or does not drive anything - clipped.
Signal led_timer_58_add_4_25/S1 undriven or does not drive anything - clipped.
Signal led_timer_58_add_4_25/CO undriven or does not drive anything - clipped.
Block i75 was optimized away.

     

OSC Summary
-----------

OSC 1:                                     Pin/Node Value
  OSC Instance Name:                                internal_oscillator_inst
  OSC Type:                                         OSCH
  STDBY Input:                                      NONE
  OSC Output:                              NODE     clk
  OSC Nominal Frequency (MHz):                      2.08



ASIC Components
---------------

Instance Name: internal_oscillator_inst
         Type: OSCH



Run Time and Memory Usage
-------------------------

   Total CPU Time: 0 secs  
   Total REAL Time: 0 secs  
   Peak Memory Usage: 37 MB
        








Copyright (c) 1991-1994 by NeoCAD Inc. All rights reserved.
     Copyright (c) 1995 AT&T Corp.   All rights reserved.
     Copyright (c) 1995-2001 Lucent Technologies Inc.  All rights reserved.
     Copyright (c) 2001 Agere Systems   All rights reserved.
     Copyright (c) 2002-2020 Lattice Semiconductor Corporation,  All rights
     reserved.