PAR: Place And Route Diamond (64-bit) 3.12.1.454.
Copyright (c) 1991-1994 by NeoCAD Inc. All rights reserved.
Copyright (c) 1995 AT&T Corp. All rights reserved.
Copyright (c) 1995-2001 Lucent Technologies Inc. All rights reserved.
Copyright (c) 2001 Agere Systems All rights reserved.
Copyright (c) 2002-2020 Lattice Semiconductor Corporation, All rights reserved.
Sun Nov 07 13:36:07 2021
C:/lscc/diamond/3.12/ispfpga\bin\nt64\par -f Blink_P2_a2_impl.p2t
Blink_P2_a2_impl_map.ncd Blink_P2_a2_impl.dir Blink_P2_a2_impl.prf -gui -msgset
D:/FPGA/AdderProject/promote.xml
Preference file: Blink_P2_a2_impl.prf.
Cost Table Summary
Level/ Number Worst Timing Worst Timing Run NCD
Cost [ncd] Unrouted Slack Score Slack(hold) Score(hold) Time Status
---------- -------- ----- ------ ----------- ----------- ---- ------
5_1 * 0 476.239 0 0.377 0 04 Completed
* : Design saved.
Total (real) run time for 1-seed: 4 secs
par done!
Note: user must run 'Trace' for timing closure signoff.
Lattice Place and Route Report for Design "Blink_P2_a2_impl_map.ncd"
Sun Nov 07 13:36:07 2021
Best Par Run
PAR: Place And Route Diamond (64-bit) 3.12.1.454.
Command Line: par -w -l 5 -i 6 -t 1 -c 0 -e 0 -gui -msgset D:/FPGA/AdderProject/promote.xml -exp parUseNBR=1:parCDP=0:parCDR=0:parPathBased=OFF:parASE=1 Blink_P2_a2_impl_map.ncd Blink_P2_a2_impl.dir/5_1.ncd Blink_P2_a2_impl.prf
Preference file: Blink_P2_a2_impl.prf.
Placement level-cost: 5-1.
Routing Iterations: 6
Loading design for application par from file Blink_P2_a2_impl_map.ncd.
Design name: TinyFPGA_A2
NCD version: 3.3
Vendor: LATTICE
Device: LCMXO2-1200HC
Package: QFN32
Performance: 4
Loading device for application par from file 'xo2c1200.nph' in environment: C:/lscc/diamond/3.12/ispfpga.
Package Status: Final Version 1.44.
Performance Hardware Data Status: Final Version 34.4.
License checked out.
Ignore Preference Error(s): True
Device utilization summary:
PIO (prelim) 13+4(JTAG)/108 16% used
13+4(JTAG)/22 77% bonded
SLICE 15/640 2% used
OSC 1/1 100% used
Number of Signals: 67
Number of Connections: 89
Pin Constraint Summary:
13 out of 13 pins locked (100% locked).
The following 1 signal is selected to use the primary clock routing resources:
clk (driver: internal_oscillator_inst, clk load #: 13)
No signal is selected as secondary clock.
No signal is selected as Global Set/Reset.
Starting Placer Phase 0.
Finished Placer Phase 0. REAL time: 0 secs
Starting Placer Phase 1.
..................
Placer score = 4446.
Finished Placer Phase 1. REAL time: 3 secs
Starting Placer Phase 2.
.
Placer score = 4446
Finished Placer Phase 2. REAL time: 3 secs
Clock Report
Global Clock Resources:
CLK_PIN : 0 out of 8 (0%)
PLL : 0 out of 1 (0%)
DCM : 0 out of 2 (0%)
DCC : 0 out of 8 (0%)
Global Clocks:
PRIMARY "clk" from OSC on comp "internal_oscillator_inst" on site "OSC", clk load = 13
PRIMARY : 1 out of 8 (12%)
SECONDARY: 0 out of 8 (0%)
Edge Clocks:
No edge clock selected.
I/O Usage Summary (final):
13 + 4(JTAG) out of 108 (15.7%) PIO sites used.
13 + 4(JTAG) out of 22 (77.3%) bonded PIO sites used.
Number of PIO comps: 13; differential: 0.
Number of Vref pins used: 0.
I/O Bank Usage Summary:
+----------+--------------+------------+-----------+
| I/O Bank | Usage | Bank Vccio | Bank Vref |
+----------+--------------+------------+-----------+
| 0 | 5 / 9 ( 55%) | 2.5V | - |
| 1 | 2 / 2 (100%) | 2.5V | - |
| 2 | 4 / 9 ( 44%) | 2.5V | - |
| 3 | 2 / 2 (100%) | 2.5V | - |
+----------+--------------+------------+-----------+
Total placer CPU time: 2 secs
Dumping design to file Blink_P2_a2_impl.dir/5_1.ncd.
0 connections routed; 89 unrouted.
Starting router resource preassignment
Completed router resource preassignment. Real time: 3 secs
Start NBR router at 13:36:10 11/07/21
*****************************************************************
Info: NBR allows conflicts(one node used by more than one signal)
in the earlier iterations. In each iteration, it tries to
solve the conflicts while keeping the critical connections
routed as short as possible. The routing process is said to
be completed when no conflicts exist and all connections
are routed.
Note: NBR uses a different method to calculate timing slacks. The
worst slack and total negative slack may not be the same as
that in TRCE report. You should always run TRCE to verify
your design.
*****************************************************************
Start NBR special constraint process at 13:36:10 11/07/21
Start NBR section for initial routing at 13:36:10 11/07/21
Level 4, iteration 1
0(0.00%) conflict; 0(0.00%) untouched conn; 0 (nbr) score;
Estimated worst slack/total negative slack<setup>: 476.239ns/0.000ns; real time: 3 secs
Info: Initial congestion level at 75% usage is 0
Info: Initial congestion area at 75% usage is 0 (0.00%)
Start NBR section for normal routing at 13:36:10 11/07/21
Level 4, iteration 1
0(0.00%) conflict; 0(0.00%) untouched conn; 0 (nbr) score;
Estimated worst slack/total negative slack<setup>: 476.239ns/0.000ns; real time: 3 secs
Start NBR section for setup/hold timing optimization with effort level 3 at 13:36:10 11/07/21
Start NBR section for re-routing at 13:36:11 11/07/21
Level 4, iteration 1
0(0.00%) conflict; 0(0.00%) untouched conn; 0 (nbr) score;
Estimated worst slack/total negative slack<setup>: 476.239ns/0.000ns; real time: 4 secs
Start NBR section for post-routing at 13:36:11 11/07/21
End NBR router with 0 unrouted connection
NBR Summary
-----------
Number of unrouted connections : 0 (0.00%)
Number of connections with timing violations : 0 (0.00%)
Estimated worst slack<setup> : 476.239ns
Timing score<setup> : 0
-----------
Notes: The timing info is calculated for SETUP only and all PAR_ADJs are ignored.
Total CPU time 3 secs
Total REAL time: 4 secs
Completely routed.
End of route. 89 routed (100.00%); 0 unrouted.
Hold time timing score: 0, hold timing errors: 0
Timing score: 0
Dumping design to file Blink_P2_a2_impl.dir/5_1.ncd.
All signals are completely routed.
PAR_SUMMARY::Run status = Completed
PAR_SUMMARY::Number of unrouted conns = 0
PAR_SUMMARY::Worst slack<setup/<ns>> = 476.239
PAR_SUMMARY::Timing score<setup/<ns>> = 0.000
PAR_SUMMARY::Worst slack<hold /<ns>> = 0.377
PAR_SUMMARY::Timing score<hold /<ns>> = 0.000
PAR_SUMMARY::Number of errors = 0
Total CPU time to completion: 3 secs
Total REAL time to completion: 4 secs
par done!
Note: user must run 'Trace' for timing closure signoff.
Copyright (c) 1991-1994 by NeoCAD Inc. All rights reserved.
Copyright (c) 1995 AT&T Corp. All rights reserved.
Copyright (c) 1995-2001 Lucent Technologies Inc. All rights reserved.
Copyright (c) 2001 Agere Systems All rights reserved.
Copyright (c) 2002-2020 Lattice Semiconductor Corporation, All rights reserved.