Lattice Mapping Report File for Design Module 'TinyFPGA_A2'
Design Information
Command line: map -a MachXO2 -p LCMXO2-1200HC -t QFN32 -s 4 -oc Commercial
4Bit_P2_a2_impl.ngd -o 4Bit_P2_a2_impl_map.ncd -pr 4Bit_P2_a2_impl.prf -mp
4Bit_P2_a2_impl.mrp -lpf C:/FPGA/4BitProject/impl/4Bit_P2_a2_impl.lpf -lpf
C:/FPGA/4BitProject/template_P2_a2.lpf -c 0 -gui -msgset
C:/FPGA/4BitProject/promote.xml
Target Vendor: LATTICE
Target Device: LCMXO2-1200HCQFN32
Target Performance: 4
Mapper: xo2c00, version: Diamond (64-bit) 3.12.1.454
Mapped on: 11/23/21 15:00:58
Design Summary
Number of registers: 82 out of 1346 (6%)
PFU registers: 82 out of 1280 (6%)
PIO registers: 0 out of 66 (0%)
Number of SLICEs: 629 out of 640 (98%)
SLICEs as Logic/ROM: 629 out of 640 (98%)
SLICEs as RAM: 0 out of 480 (0%)
SLICEs as Carry: 34 out of 640 (5%)
Number of LUT4s: 1255 out of 1280 (98%)
Number used as logic LUTs: 1187
Number used as distributed RAM: 0
Number used as ripple logic: 68
Number used as shift registers: 0
Number of PIO sites used: 18 + 4(JTAG) out of 22 (100%)
Number of block RAMs: 4 out of 7 (57%)
Number of GSRs: 0 out of 1 (0%)
EFB used : No
JTAG used : No
Readback used : No
Oscillator used : Yes
Startup used : No
POR : On
Bandgap : On
Number of Power Controller: 0 out of 1 (0%)
Number of Dynamic Bank Controller (BCINRD): 0 out of 4 (0%)
Number of Dynamic Bank Controller (BCLVDSO): 0 out of 1 (0%)
Number of DCCA: 0 out of 8 (0%)
Number of DCMA: 0 out of 2 (0%)
Number of PLLs: 0 out of 1 (0%)
Number of DQSDLLs: 0 out of 2 (0%)
Number of CLKDIVC: 0 out of 4 (0%)
Number of ECLKSYNCA: 0 out of 4 (0%)
Number of ECLKBRIDGECS: 0 out of 2 (0%)
Notes:-
1. Total number of LUT4s = (Number of logic LUT4s) + 2*(Number of
distributed RAMs) + 2*(Number of ripple logic)
2. Number of logic LUT4s does not include count of distributed RAM and
ripple logic.
Number of clocks: 2
Net clk: 30 loads, 30 rising, 0 falling (Driver: internal_oscillator_inst )
Net p2pin13_c_17: 21 loads, 21 rising, 0 falling (Driver: led_timer_95__i17
)
Number of Clock Enables: 5
Net PHASE: 4 loads, 4 LSLICEs
Net EBR_ROM_IP2_inst/Microcode1_Output_4: 1 loads, 1 LSLICEs
Net EBR_ROM_IP2_inst/Microcode1_Output_5: 3 loads, 3 LSLICEs
Net QuadD_74173_inst3/Q_3_N_179_0: 2 loads, 2 LSLICEs
Net QuadD_74173_inst4/Q_3_N_179_0: 2 loads, 2 LSLICEs
Number of LSRs: 2
Net RESETn: 8 loads, 8 LSLICEs
Net Program_Address_11: 6 loads, 6 LSLICEs
Number of nets driven by tri-state buffers: 0
Top 10 highest fanout non-clock nets:
Net Program_Address_3: 664 loads
Net p2pin12_c_0: 518 loads
Net Program_Address_1: 474 loads
Net Program_Address_2: 454 loads
Net Program_Address_4: 445 loads
Net Program_Address_5: 237 loads
Net Program_Address_6: 117 loads
Net Program_Address_7: 59 loads
Net Program_Address_8: 35 loads
Net n340: 29 loads
Number of warnings: 3
Number of errors: 0
Design Errors/Warnings
WARNING - map: Converting L6MUX21 i6753/GATE to normal MUX21.
WARNING - map: Converting L6MUX21 i6756/GATE to normal MUX21.
WARNING - map: Converted 2 L6MUX21's to normal MUX21.
IO (PIO) Attributes
+---------------------+-----------+-----------+------------+
| IO Name | Direction | Levelmode | IO |
| | | IO_TYPE | Register |
+---------------------+-----------+-----------+------------+
| p2pin0 | OUTPUT | LVCMOS25 | |
+---------------------+-----------+-----------+------------+
| p2pin1 | OUTPUT | LVCMOS25 | |
+---------------------+-----------+-----------+------------+
| p2pin2 | OUTPUT | LVCMOS25 | |
+---------------------+-----------+-----------+------------+
| p2pin3 | OUTPUT | LVCMOS25 | |
+---------------------+-----------+-----------+------------+
| p2pin4 | OUTPUT | LVCMOS25 | |
+---------------------+-----------+-----------+------------+
| p2pin5 | OUTPUT | LVCMOS25 | |
+---------------------+-----------+-----------+------------+
| pin7_done | OUTPUT | LVCMOS25 | |
+---------------------+-----------+-----------+------------+
| pin8_pgmn | OUTPUT | LVCMOS25 | |
+---------------------+-----------+-----------+------------+
| p2pin6 | OUTPUT | LVCMOS25 | |
+---------------------+-----------+-----------+------------+
| p2pin7 | OUTPUT | LVCMOS25 | |
+---------------------+-----------+-----------+------------+
| p2pin12 | OUTPUT | LVCMOS25 | |
+---------------------+-----------+-----------+------------+
| p2pin13 | OUTPUT | LVCMOS25 | |
+---------------------+-----------+-----------+------------+
| p2pin14 | OUTPUT | LVCMOS25 | |
+---------------------+-----------+-----------+------------+
| p2pin15 | OUTPUT | LVCMOS25 | |
+---------------------+-----------+-----------+------------+
| p2pin8 | INPUT | LVCMOS25 | |
+---------------------+-----------+-----------+------------+
| p2pin9 | INPUT | LVCMOS25 | |
+---------------------+-----------+-----------+------------+
| p2pin10 | INPUT | LVCMOS25 | |
+---------------------+-----------+-----------+------------+
| p2pin11 | INPUT | LVCMOS25 | |
+---------------------+-----------+-----------+------------+
Removed logic
Block GSR_INST undriven or does not drive anything - clipped.
Signal p2pin13_c_17_enable_13 was merged into signal
EBR_ROM_IP2_inst/Microcode1_Output_5
Signal p2pin13_c_17_enable_14 was merged into signal
EBR_ROM_IP2_inst/Microcode1_Output_4
Signal n4431 was merged into signal RESETn
Signal p2pin13_c_17_enable_10 was merged into signal PHASE
Signal Microcode0_Output_4__N_46 was merged into signal Microcode0_Output_4
Signal VCC_net undriven or does not drive anything - clipped.
Signal add_5673_13/S1 undriven or does not drive anything - clipped.
Signal add_5673_13/S0 undriven or does not drive anything - clipped.
Signal led_timer_95_add_4_33/S1 undriven or does not drive anything - clipped.
Signal led_timer_95_add_4_33/CO undriven or does not drive anything - clipped.
Signal add_5673_15/S1 undriven or does not drive anything - clipped.
Signal add_5673_15/S0 undriven or does not drive anything - clipped.
Signal add_5673_1/S1 undriven or does not drive anything - clipped.
Signal add_5673_1/S0 undriven or does not drive anything - clipped.
Signal add_5673_1/CI undriven or does not drive anything - clipped.
Signal add_5673_17/S1 undriven or does not drive anything - clipped.
Signal add_5673_17/S0 undriven or does not drive anything - clipped.
Signal add_5673_3/S1 undriven or does not drive anything - clipped.
Signal add_5673_3/S0 undriven or does not drive anything - clipped.
Signal add_5673_19/S1 undriven or does not drive anything - clipped.
Signal add_5673_19/S0 undriven or does not drive anything - clipped.
Signal add_5673_21/S1 undriven or does not drive anything - clipped.
Signal add_5673_21/S0 undriven or does not drive anything - clipped.
Signal add_5673_5/S1 undriven or does not drive anything - clipped.
Signal add_5673_5/S0 undriven or does not drive anything - clipped.
Signal add_5673_23/S1 undriven or does not drive anything - clipped.
Signal add_5673_23/S0 undriven or does not drive anything - clipped.
Signal add_5673_25/S1 undriven or does not drive anything - clipped.
Signal add_5673_25/S0 undriven or does not drive anything - clipped.
Signal add_5673_27/S1 undriven or does not drive anything - clipped.
Signal add_5673_27/S0 undriven or does not drive anything - clipped.
Signal add_5673_29/S1 undriven or does not drive anything - clipped.
Signal add_5673_29/S0 undriven or does not drive anything - clipped.
Signal add_5673_31/S1 undriven or does not drive anything - clipped.
Signal add_5673_31/S0 undriven or does not drive anything - clipped.
Signal add_5673_33/S0 undriven or does not drive anything - clipped.
Signal add_5673_33/CO undriven or does not drive anything - clipped.
Signal led_timer_95_add_4_1/S0 undriven or does not drive anything - clipped.
Signal led_timer_95_add_4_1/CI undriven or does not drive anything - clipped.
Signal add_5673_7/S1 undriven or does not drive anything - clipped.
Signal add_5673_7/S0 undriven or does not drive anything - clipped.
Signal add_5673_9/S1 undriven or does not drive anything - clipped.
Signal add_5673_9/S0 undriven or does not drive anything - clipped.
Signal add_5673_11/S1 undriven or does not drive anything - clipped.
Signal add_5673_11/S0 undriven or does not drive anything - clipped.
Block EBR_ROM_IP2_inst/i4165_1_lut was optimized away.
Block EBR_ROM_IP2_inst/i4164_1_lut was optimized away.
Block i4172_1_lut was optimized away.
Block i4168_1_lut was optimized away.
Block Microcode0_Output_4__I_0_1_lut was optimized away.
Block i2 was optimized away.
Memory Usage
/EBR_RAM_DQ_IP_inst:
EBRs: 2
RAM SLICEs: 0
Logic SLICEs: 0
PFU Registers: 0
-Contains EBR EBR_RAM_DQ_IP_0_1_0: TYPE= DP8KC, Width_A= 2, Depth_A=
4096, REGMODE_A= OUTREG, REGMODE_B= NOREG, RESETMODE= SYNC,
ASYNC_RESET_RELEASE= SYNC, WRITEMODE_A= NORMAL, WRITEMODE_B= NORMAL,
GSR= DISABLED, MEM_INIT_FILE= INIT_ALL_0s, MEM_LPC_FILE=
EBR_RAM_DQ_IP.lpc
-Contains EBR EBR_RAM_DQ_IP_0_0_1: TYPE= DP8KC, Width_A= 2, Depth_A=
4096, REGMODE_A= OUTREG, REGMODE_B= NOREG, RESETMODE= SYNC,
ASYNC_RESET_RELEASE= SYNC, WRITEMODE_A= NORMAL, WRITEMODE_B= NORMAL,
GSR= DISABLED, MEM_INIT_FILE= INIT_ALL_0s, MEM_LPC_FILE=
EBR_RAM_DQ_IP.lpc
/EBR_ROM_IP2_inst:
EBRs: 1
RAM SLICEs: 0
Logic SLICEs: 0
PFU Registers: 0
-Contains EBR EBR_ROM_IP2_0_0_0: TYPE= DP8KC, Width_A= 8, Depth_A= 128,
REGMODE_A= OUTREG, REGMODE_B= NOREG, RESETMODE= SYNC,
ASYNC_RESET_RELEASE= SYNC, WRITEMODE_A= NORMAL, WRITEMODE_B= NORMAL,
GSR= DISABLED, MEM_INIT_FILE= microcode_1.mem, MEM_LPC_FILE=
EBR_ROM_IP2.lpc
/EBR_ROM_IP_inst:
EBRs: 1
RAM SLICEs: 0
Logic SLICEs: 0
PFU Registers: 0
-Contains EBR EBR_ROM_IP_0_0_0: TYPE= DP8KC, Width_A= 8, Depth_A= 128,
REGMODE_A= OUTREG, REGMODE_B= NOREG, RESETMODE= SYNC,
ASYNC_RESET_RELEASE= SYNC, WRITEMODE_A= NORMAL, WRITEMODE_B= NORMAL,
GSR= DISABLED, MEM_INIT_FILE= microcode_0.mem, MEM_LPC_FILE=
EBR_ROM_IP.lpc
OSC Summary
-----------
OSC 1: Pin/Node Value
OSC Instance Name: internal_oscillator_inst
OSC Type: OSCH
STDBY Input: NONE
OSC Output: NODE clk
OSC Nominal Frequency (MHz): 2.08
ASIC Components
---------------
Instance Name: internal_oscillator_inst
Type: OSCH
Instance Name: EBR_RAM_DQ_IP_inst/EBR_RAM_DQ_IP_0_1_0
Type: DP8KC
Instance Name: EBR_RAM_DQ_IP_inst/EBR_RAM_DQ_IP_0_0_1
Type: DP8KC
Instance Name: EBR_ROM_IP2_inst/EBR_ROM_IP2_0_0_0
Type: DP8KC
Instance Name: EBR_ROM_IP_inst/EBR_ROM_IP_0_0_0
Type: DP8KC
Run Time and Memory Usage
-------------------------
Total CPU Time: 2 secs
Total REAL Time: 2 secs
Peak Memory Usage: 47 MB
Copyright (c) 1991-1994 by NeoCAD Inc. All rights reserved.
Copyright (c) 1995 AT&T Corp. All rights reserved.
Copyright (c) 1995-2001 Lucent Technologies Inc. All rights reserved.
Copyright (c) 2001 Agere Systems All rights reserved.
Copyright (c) 2002-2020 Lattice Semiconductor Corporation, All rights
reserved.